(Frequently asked questions)
How do we decide when to put a temporary green on?
All
Greenstaff follow a procedure and guidelines which determines whether a
temporary should be used. These are:
- Walk on and walk off
areas (traffic management around greens and on greens)
- Standing water
(localised flooding/surface water)
- Unstable putting surface
(root shearing/compaction)
- The long term
detrimental effects to the playing surface
- During a thaw following
freezing conditions
- Light dusting of snow of
thawing snow
- Undergoing maintenance
Example:
The 8th green on the left is firm and dry but the green is on a
temporary. The right side is soft and unstable underfoot. The main walk on,
walk off area is from the right. Continued traffic will increase damage and worsen
surface stability, which will impact on the long term recovery of the
green.
Do we need to take heavy machinery onto the course all the time?
No
we do not, however it is impractical to carry out certain tasks without using
certain machinery. Sometimes circumstances outside our control determines what
machinery needs to be used and where it needs to be taken. Machinery where
possible is driven clear of the main playing surfaces. During prolonged periods
of poor weather machinery tracks away from the main playing areas can also
become unusable, therefore alternative routes need to be taken to prevent
machinery getting stuck or damaged.
What is the policy
regarding leaf clearing?
The leafing policy follows a set
procedure. The first part of the policy is to identify the main playing
surfaces and list them in priority for both the playing aspects and the area or
access, in relation to any detrimental impact leaf clearing will or will not
have.
1. Greens
2. Approaches
3. Around greens
4. Tees
5. Fairways
6. rough
The greens, approaches and
collars are cleared using knapsack blowers. In ideal ground conditions the
remainder is blown clear using a tractor mounted blower into woodland or piled
for collection. This is the same process for tees. Fairways and rough are cleared
using the tractor mounted blowers, again blown into woodland or piled for
collection.
In poor ground conditions it
is not always practical to follow these procedures.
During periods of high
activity and limited resources involving a variety of others tasks (i.e. tree
work, mowing), it is impractical to expect all areas to be cleared at any one
time. If conditions are poor the leaf clearing process can become more time
consuming as the larger machinery cannot be used.
Leaves that are piled are
collected using a tractor pulled leaf collector/vacuum. Due to the weight and
access required to areas using this particular machinery, some piles may remain
static for prolonged periods of time. Priority of clearing these piles again
focuses on location and ground stability.